Spirit UltraMic Plus - Manual (Page 2)

Page 2
SAFETY PRECAUTIONS
The SPIRIT MONITOR 2 mixer must only be connected
through the Power Supply supplied.
The wires in the mains lead are coloured in accordance with the
following code:
Earth:
Green and Yellow
(Green/Yellow - US)
Neutral: Blue
(White - US)
Live: Brown
(Black - US)
As the colours of the wires in the mains lead may not correspond
with the coloured markings identifying the terminals in your plug,
proceed as follows:
l The wire which is coloured Green and Yellow must be
connected to the terminal in the plug which is marked with
the letter E or by the earth symbol.
l The wire which is coloured Blue must be connected to the
terminal in the plug which is marked with the letter N.
l The wire which is coloured Brown must be connected to the
terminal in the plug which is marked with the letter L.
Ensure that these colour codings are followed carefully in the
event of the plug being changed.
To avoid the risk of fire, replace the mains fuse only with
the correct value fuse, as marked on the rear panel.
INTRODUCTION
Thank you for purchasing a Monitor 2 mixer, brought to you with pride by the SPIRIT team of Andy, Colin,
Chris, James, Simon, Mukesh, Graham, Martin, Paul, Tony and Peter, with the support of many others - we
hope you will have as much fun using it as we did building it!
For your own safety and to
avoid invalidation of the
warranty please
read this section carefully.