"how-to" maintenance, Inspecting the spark plug, Engine oil change – Subaru EH025P User Manual

Page 24: Caution

Advertising
background image

7. "HOW-TO" MAINTENANCE

- 13 -

INSPECTING THE SPARK
PLUG

Clean off carbon deposits on the
spark plug electrode using a plug
cleaner or wire brush.

Check electrode gap.
Adjust gap 0.7 mm to 0.8 mm

(0.03 inches)

Use a proper spark plug :

NGK CMR6A

0.7 to 0.8 mm
(0.03 in.)

ENGINE OIL CHANGE

Initial oil change

After 20 hours of operation

Thereafter

Every 50 hours of operation

Refer to the recommended oil table
on page 7.

Always use the best grade and clean
oil. Contaminated oil, poor quality oil
and shortage of oil cause damage to
engine or shorten the engine life.
OIL CAPACITY

EH025 : 80 mL
EH035 : 100 mL

1) Remove the oil gauge.

Be cautious to place the oil gauge in
a place where it will not gather dirt,
dust or other foreign matter.

2) Place a cloth or paper towel to the

area around the oil filler hole.

CAUTION

Make sure the fuel cap is tightly
secured to avoid spillage.

Advertising