Swann 8 Channel DVR H.264 User Manual
Page 11
9
10) Pause: During playback, will pause
the current recording and leave a still-
frame on screen. In live-viewing mode,
this will activate the auto-sequence
mode, where the display automatically
cycles through the available camera
signals (this must be correctly configured
and enabled to function correctly).
11) Play: If pressed in live-viewing mode,
this will take you directly into playback
mode, and begin playing the most
recent recording. In playback mode, use
it to resume playback after pausing or
stopping a recording.
12) Fast-Forward: During playback,
this will speed up the footage. Press
multiple times to increase the speed of
the playback. When navigating through
menus, this button will move the cursor
to the right.
13) Stop: In playback mode, pressing
this button will stop playback.
14) Record: Press to immediately start
recording. This acts as a manual override
to the schedule and motion recording
modes. For a channel to be recorded in
this mode (or any other) it must listed as
‘active’ in the Camera Setup and Record
Setup menus.
15 ~ 18) Arrows: Move the cursor in the
selected direction in the menus.
19) Select: The equivalent of Enter/
Return on a computer keyboard. Use this
button to (as the name suggests) select
an option in the menus, or to confirm an
entry.
1 2 3
19
8
5
4
9
10
11
6
7
12
13 14
15
17
18
16
Layout of the DVR4-2550