Samsung RIF-BT10 - Manual (Page 16)

V1.00 WWW.SAMSUNGMINIPRINTERS.COM 16
Attachment 6. Printer driver installation & Test page printing
1. Once the setting’s complete, disconnect the Bluetooth master from the PC, reconnect it and initialize the
system. Turn the printer off and then on to initialize the Bluetooth slave.
2. Wait for approximately 20 seconds for the Bluetooth master and slave are automatically reconnected.
3. Install the printer driver (Available at website)
a) SRP 350: V3.0.5E above
b) SRP 270: V3.0.3E above
4. Open the printer driver and select a port
a) USB port: Select the virtual port (COM x) of step 2).
b) Serial (RS-232C): Select the COM x connected.
5. Select the port and Click “ Apply” .