Sony SPP-A2770 - Manual (Page 51)

51 US
Intercom Operation
Intercom Operation
Transferring a call
(when the system has any other additional cordless
handsets)
You can transfer a call between the cordless handsets without disconnecting the call.
This function works only when one or more additional cordless handsets are
available on the system.
Example: Transferring a call from station
number 1 to station number 2.
1
Press (INTERCOM).
The call is put on hold.
2
When the system has an additional
cordless handset
Skip this step.
When the system has two or more
additional cordless handsets
Turn Jog Dial to choose “TO HANDSET 2”,
and then press Jog Dial.
3
Both cordless handsets ring and “**
INTERCOM 2 **” appears on the display
of the cordless handset whose station
number is 1 and “** INTERCOM 1 **”
appears on the display of the cordless
handset whose station number is 2.
4
Pick up the cordless handset whose station
number is 2 from the charger (When Quick
talk is set to “ON”; see page 38), or press
(TALK) or (INTERCOM) on the cordless
handset.
You can talk with each other.
5
To talk to the caller with the cordless handset whose station number is 2,
replace the cordless handset on the base unit or press (OFF) on the
cordless handset whose station number is 1.
“TALK” appears on the display of the cordless handset whose station
number is 2.
If no one answers the phone
Press (INTERCOM) again.
Tip
You can receive an intercom call on the cordless handset even when the ringer volume is set to
off. The cordless handset will ring at a low level.
(OFF)