Sager Electronics STP-HD200 - Manual (Page 4)

SageTV HD Media Extender Page 4
Model STP-HD200
Copyright 2008 SageTV, LLC All rights reserved
For additional support, go to www.sagetv.com/support.html or email us at [email protected]
current resolution. For each valid resolution, check-mark its button to enable it. Then,
when using the player in client mode (connected to a SageTV server), use the Video Out
button to toggle the output resolution between the ones check-marked here. 2) The
current resolution set on the resolution selection menu will be used as the default
resolution when connecting to a SageTV server.
Audio Output – Choose this option to configure which audio output port to use. Select
from Analog (stereo L+R), S/PDIF (optical), or HDMI.
Advanced Setup – Displays the advanced Detailed Setup options used to configure
various options for stand alone mode. On this menu, various options can be configured to
control the use of the HD Theater only in stand-alone mode. Note: When used as an
extender or placeshifter client connected to a SageTV server, similar settings are
available in the client’s user interface. Those settings are only used when connected to a
SageTV server.
As the available options are highlighted on the right side of the screen, brief text
explaning the option will be shown at the bottom of the screen.
For basic configuration, please note a few options that you may wish to consider:
o General
Import Directory Management – Choose whether the player should
automatically scan all folders on your local network and attached devices
to find media files or whether you will manually specify the import folders
to be scanned. Note: Import directories can be manually selected from the
Filesystems menu.
Automatic Library Rescan Frequency – Configure the number of hours
between automatic library rescans. To disable automatic rescans, enter 0.
o Multimedia
Overscan Settings – If the menus do not fit the TV screen properly, use
this option to modify the placement of the user interface. Through a series
of two full screen menus, you will first adjust the location of the upper left
corner of the user interface, then you will adjust the location of the lower
right corner of the user interface. When you are done, the user interface
will completely fill the display.
Display Aspect Ratio Settings – If the pictures and text on the user
interface appear stretched, use this option to define the aspect ratio of the
TV display. After selcting this option, you may choose from a few pre-set
choices, or manually adjust the circle until it appears round.
o Server
Windows File Server – If you would like ot be able to browse the files on
attached devices from a Windows PC on your local network, enable this