Samsung CLX-216x - Manual (Page 15)

1.5
<Introduction>
Finding more information
You can find information for setting up and using your machine from the
following resources, either printed or onscreen.
Quick Install Guide
Provides information on setting up your
machine and, therefore, be sure to follow the
instructions in the guide to get the machine
ready.
Online
User’s Guide Provides you with step-by-step instructions for
using your machine’s full features, and
contains information for maintaining your
machine, troubleshooting, and installing
accessories.
This user’s guide also contains the Software
Section providing you with information on how
to print documents with your machine on
various operating systems, and how to use the
supplied software utilities.
Network Printer
User’s Guide
If your machine is not equipped with a
network interface, this CD is not provided.
Contained on the network utilities CD,
provides you with information on setting up
and connecting your machine to a network.
Printer Driver
Help Provides you with help information on printer
driver properties and instructions for setting up
the properties for printing. To access a printer
driver help screen, click Help from the printer
properties dialog box.
Website If you have Internet access, you can get help,
support, printer drivers, manuals, and order
information from the Samsung website,
www.samsungprinter.com.
Note
You can access the user’s guides in
other languages from the Manual
folder on the Printer software CD.
Selecting a location
Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to the
edge of your desk or table.
Clearance space
• Front: 482.6 mm
(enough space so that the paper tray can be removed)
• Back: 100 mm (enough space for ventilation)
• Right: 100 mm (enough space for ventilation)
• Left: 100 mm (enough space for ventilation)
Place the machine on a flat and stable surface for not letting it lean
more than 2 mm (0.08 inches). Otherwise, it may affect the printing
quality.
Note
When you move the printer, do not tilt or turn it upside down. Or
the inside of the printer may be contaminated by toner, which
can cause damage to the printer or bad printing quality.