Sony DAV-X1 - Manual (Page 75)

O
th
e
r O
p
era
tions
75 GB
You can enjoy the sound of other components
with this system. Connect the satellite receiver
or components with a high audio output level
(including 2V output components, such as MD
decks, etc.) to the VIDEO 1/SAT 1 or VIDEO 2/
SAT 2 jacks, and perform the following to
prevent distortion occurring.
Refer to the operation manual supplied with the
components for further information on their
operation.
Lowering the input sensitivity
of the VIDEO 1/SAT 1 jack
1
Press FUNCTION repeatedly until
“VIDEO1” appears in the front panel
display.
If “SAT1” appears, the lower input
sensitivity is already set and the following
steps are unnecessary.
Each time you press FUNCTION, the
system mode changes in the following
sequence:
DVD t FM t AM t VIDEO1 (SAT1)
t VIDEO2 (SAT2) t TV t DVD t
….
2
Press AMP MENU.
3
Press X / x repeatedly until “SET
VIDEO1” blinks in the front panel
display, then press ENTER or
c .
4
Press X / x to select “SET SAT1”
(“SAT1” blinks) in the front panel
display.
The input sensitivity is lowered.
5
Press ENTER or AMP MENU.
The AMP MENU turns off.
• When connecting a component to the VIDEO 2/SAT
2 jack, select “VIDEO2” in step1, “SET VIDEO2” in
step 3, and “SET SAT2” in step 4.
• If you select “SET VIDEO1(2)” in step 4, the
operation is canceled and the mode display (the mode
of the system in step 1) remains as “VIDEO1(2).”
Enjoying the Sound of
Other Components
FUNCTION
AMP MENU
With cover opened.
X/x/c
ENTER
Note