Siemens Server - Manual (Page 5)

W ARNING N OTIFICATIONS
i
NOTE: PLEASE PAY PARTICULAR ATTENTION TO THE WARNING NOTICES FOUND ON THE
FOLLOWING PAGES AND THROUGHOUT THIS MANUAL.
DISCONNECT AND LOCKOUT POWER BEFORE SERVICING
Line voltage (120/240VAC) can be present inside the ChemWeb server and caution should be
used to prevent electrical shock, burns or electrocution. Be sure electric power is disconnected
before opening the cover of any electrical device. Follow all local safety policies, procedures and
electrical codes, to prevent injury from electrical hazards, before opening the cover of this
controller. If you are not trained and comfortable performing work on electrical equipment,
contact a licensed electrician to perform the work.