Playback, Selecting a component, Age 32 – Sony STRDG510 User Manual
Page 32: Selecting a component 1, When a test tone is not output from the speakers, Press v / v repeatedly to select “t. tone y, Repeat steps 1 t o 5 to select “t. tone n, Press the input button to select a component
32
GB
5
Press
V/v repeatedly to select
“T. TONE Y”.
The test tone is output from each speaker
in sequence as follows:
Front left
t Center t Front right t
Surround right
t Surround left t
Sub woofer
6
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see “Adjusting the level
(LEVEL menu)” (page 39).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value is shown on the display
during adjustment.
7
“T. TONE N”.
You can also press any input buttons.
The test tone turns off.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
Note
The test tone does not work when ANALOG
DIRECT is selected.
Selecting a component
1
Press the input button to select
a component.
You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display.
Playback
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
VIDEO 1
VIDEO 2
VIDEO 3
DVD
2CH
A.F.D.
RETURN/EXIT
MENU
MOVIE
MUSIC
MEMORY DVD MENU
CLEAR
TOOLS
DISPLAY
MUTING
TV VOL
MASTER VOL
FM MODE
D.TUNING
D.SKIP
AMP MENU
SAT
TV
SA-CD/CD TUNER
-
F
G
g
f
5
>10/
1
3
MUTING