Sony RDR-VX500 - Manual (Page 104)

104
Recording and VCR Settings
(Features)
The “Features” setup allows you to change the
tape length, auto play and auto repeat settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select “Setup,” and press ENTER.
3
Select “Features,” and press ENTER.
The “Features” setup appears with the
following options. The default settings are
underlined.
DVD Auto Chapter
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
Note
Depending upon the size of the recording being made, the
actual interval may vary from the interval selected in
“DVD Auto Chapter.” The selected interval should only
be used as an approximation to create chapters.
VCR Function
Press ENTER, and select “Tape Length,” “Auto
Play,” and “Auto Repeat.”
◆ Tape Length
◆ Auto Play
◆ Auto Repeat
Synchro Recording
Off No chapter mark is inserted.
5 Min Inserts chapter marks at
approximately 5 minute
intervals.
15 Min Inserts chapter marks at
approximately 15 minute
intervals.
Setup
Disc Setting
Edit
Timer
DVD Auto Chapter
VCR Function
Synchro Recording
Features
: to DVD
Title list : 5 min
10:10 AM
T-120 When using a T-120 or shorter
length tape.
T-160 When using a T-160 length tape.
T-180 When using a T-180 or longer
length tape.
On To start playback automatically,
when you insert a tape with its
safety tab removed.
Off To turn off Auto play. You need
to press H PLAY to start
playback, even if you insert a tape
with its safety tab removed.
On To play back a tape repeatedly.
The VCR rewinds a tape to the
beginning and restarts playback
automatically.
Off To turn off Auto repeat.
to DVD Sets the recorder to record
programs from connected
equipment that has a timer
function (such as a satellite tuner)
to a DVD disc.
to Video Sets the recorder to record
programs from connected
equipment that has a timer
function (such as a satellite tuner)
to a VHS tape.