Sebo Airbelt D - Manual (Page 7)

7
IDENTIFICATION OF PARTS
10
8
12 13
5
1
11
14
7
26
27
20
21
22
23
24
25
17
6
2
3
4
15
16
18
9
17
19
14. Hose neck
15. Cover release catch
16. Carrying handle
17. AIRBELT shock absorber
18. Filter bag cover
19. Suction opening
20. Parking groove
21. Power cable
22. Dusting brush
23. AIRBELT clip
24. Upholstery nozzle
25. Crevice nozzle
26. Carrying/Parking groove
27. Micro filter holder
Push the neck (14) of the hose (11) into the suction opening of
the canister (19). When all four notches are lined up correctly,
the neck will snap firmly into place. To release the hose from
the suction opening, squeeze the release tabs (13) on both sides
of the neck of the hose (14), and pull the neck out.
Connect the handle grip (1) to the top of the telescopic tube (5).
Snap in place. To release the telescopic tube (5) from the han-
dle grip, push the handle release button (3) and slide the handle out.
Attach the head or brush to the bottom of the telescopic tube (5). Insert the bottom of the telescopic tube into the neck of the
head or brush (10) until it locks into place; or line up the square hole in the telescopic tube with the notches in the front of the
neck, and snap firmly into place. To release a head or brush from the telescopic tube (5), push the head release button (9), and
pull the head or brush tool off the end of the telescopic tool. The release button (9) is in the same position on all of the heads,
brushes and power heads.
NOTE: To attach a SEBO power head (ET-1, ET-2 or DISCO) to your D4 canister, please refer to your power head
owner’s manual for instructions. Attaching incorrectly could cause damage!
Optional Brushes, Heads & Attachments
32. Premium Parquet nozzle - Part #7200DG
10. Kombi nozzle - Part #7260DG
33. TT-C Turbo brush - Part #6780ER
34. Straight tube (20 in.) - Part #1084HG
35. Hand-held Turbo brush - Part #6179DA
36. Wall and floor brush - Part #1325HG
37. Flat Upholstery nozzle - Part #1090HG
38. Extension hose (9 feet) - Part #1495AM
39. Radiator brush - Part #1496DG
17. AIRBELT - Available in several colors
and patterns - Part #6047AM/01-08
25. Crevice nozzle
28. Parquet brush
Standard & Optional Power Heads
29.ET-1 Power head - Standard on
Premium D4 Black and
Premium D4 White
Optional for D4 Red: Part #9299AM
30. ET-2 Power head - Optional for
D4 Red: Part #9250AM
31. DISCO - Optional for all D4 vacuums
Black: Part #9433AM
White: Part #9430AM
33
10
39
ASSEMBLY
30
1. Handle grip
2. Power control slider
3. Handle release button
4. Slide Button
5. Telescopic tube
6. On/Off button
7. Cable rewind button
8. LED suction-power indicator
9. Tool release button
10. Kombi nozzle (optional)
11. Hose
12. Bag full or clog indicator
13. Hose neck release tabs
28
25
24 22
22. Dusting brush
24. Upholstery nozzle
1
5
3
5
9
10
32
17
Standard Attachments & Heads
29
14 19
13
31
36
35
34
38
Filters & Filter Bags
40. Filter Bag
Filter Box D
incl. 8 filter bags -
Part #8120AM
41. Hospital-grade
Micro Filter
42. Motor Filter
Micro Filter Box
incl. 1 micro filter
and 1 motor filter -
Part #8191AM
40
41
42
37