Samsung DCS-408i - Manual (Page 33)

Samsung System Administration Guide
DCS-408 & 408i November 2001
26
ACTION DISPLAY
1. Open customer programming and select 107
2. Dial the station number (e.g., 25)
OR
Press UP or DOWN to scroll through the station numbers
and press the right soft key to move the cursor
3. Enter the key number (e.g., 18)
OR
Press
UP and DOWN to scroll through the keys and use the
right soft key to move the cursor
OR
Press the key to be programmed
4. Enter the extender (see table above) and the system displays
your
selection.
5. Select another key
OR
If there are no more entries for this station, press the left soft
key to return to step 2
OR
Press
TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
[21] EXT EXTEND
01 : DT71
➔
[25] EXT EXTEND
18 : DS
➔ DS_
[25] EXT EXTEND
01 : DT71
➔
[25] EXT EXTEND
18 : DS27
➔