Samsung DCS-408i - Manual (Page 15)

Samsung System Administration Guide
DCS-408 & 408i November 2001
8
Number to Name Translation
The system provides a number to name translation table for associating names with
incoming call numbers. You then have the choice of displaying the name associated
with the number on your keyset display, rather than the CLIP number
. When the CLIP
number is received, the table is searched. If a match is found, the system displays the
corresponding name from the table.
See Adding Names to the Translation Table in the “System Administrator Program-
ming” section of this guide.
Note: MMC 119 is used to select the CLIP display for a keyset.