Samsung DCS-408i - Manual (Page 17)

Samsung System Administration Guide
DCS-408 & 408i November 2001
10
Set Automatic Night Service
[MMC 507]
Enters the system into Night Service mode automatically by utilising time and day ta-
bles. A NIGHT key is not needed as the system will switch automatically. (However, it
is useful to have a dedicated NIGHT key so the status can be manually changed if
necessary.) The start time is the time the system switches from Day to Night Service;
the end time is when it switches back from Night to Day Service (e.g., start 1730
Wednesday, end 0800 Thursday). The numbers to dial to select days are:
0 SUN 4 THU
1 MON 5 FRI
2 TUE 6 SAT
3 WED
All times are entered in 24-hour clock format (e.g. 1730 is 5.30pm).
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ACTION DISPLAY
1. Open customer programming and select 507
2. Dial day number (0–6, e.g. 3=Wed)
OR
Press UP or DOWN key to select day and press right soft
key to advance cursor
3. Enter the Start time for night (e.g. 1730)
If time entered is valid, cursor moves to End time
4. Enter the End time (e.g. 0800)
If time entered is valid, system returns to step 2
5. Press TRSF to store and exit
programming
OR
Press SPEAKER to store and advance to next MMC
NIGHT TIME (SUN)
ST: END:
NIGHT TIME (WED)
ST: END:
NIGHT TIME (WED)
ST:1730 END: 0 80 0
NIGHT TIME (WED)
ST:1730 END: _