Samsung DCS-408i - Manual (Page 19)

Samsung System Administration Guide
DCS-408 & 408i November 2001
12
Reset Station Passcodes to Default
[MMC 101]
Individual keyset users can set or change their individual passcodes. These passcodes
are used to lock and unlock keysets, override toll restriction (call barring) and access
the DISA feature. At times, it may be necessary for the system administrator to reset a
station’s passcode to the default value “1234.” This program cannot be used to display
passcodes, only to reset them.
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to reset passcode.
ACTION DISPLAY
1. Open customer programming and select 101
2. Dial the station number (e.g., 22)
OR
Press the UP and DOWN keys to scroll through the
keyset numbers and press the right soft key to move
the
cursor right
3. Press HOLD to reset passcode
4. Press the right soft key to return to step 2
OR
Press
TRSF to store and exit programming
OR
Press
SPEAKER to store and advance to next MMC
[21] P A S S C O D E
PASSCODE:
✱✱✱✱
[22] PASSCODE
PASSCODE: 1234
[21] P A S S C O D E
PASSCODE:
✱✱✱✱