Samsung DCS-408i - Manual (Page 29)

Samsung System Administration Guide
DCS-408 & 408i November 2001
22
Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
❍ ❍ ❍ ❍ Assign Speed Dialling Blocks
[MMC 606]
Your system can have up to 300 speed dial entries assigned (30 blocks of 10 numbers
each). Up to 200 of these can be allocated as system speed dials, and the remainder
allocated to stations as personal speed dials, with a maximum of 50 numbers per sta-
tion. Consequently, the more system speed dials that are allocated, the fewer speed
dials are available for personal use. When assigning speed dials, this MMC displays
the number of system or personal blocks that are currently assigned and also shows
the number remaining to be assigned, called the ‘Free List’. This program also allows
you to delete blocks of speed dial if required.
ACTION
DISPLAY
1. Open customer programming and select 606 FREE LIST:60
SYSTEM:20
2. Press right soft key to advance cursor FREE LIST:60
SYSTEM:20
3. Press UP or DOWN key to select SYSTEM to program system
speed dials, or EXT (extension) to program personal speed
dials
If you select EXT, go to step 5
If you select SYSTEM, press right soft key and go to step 4
FREE LIST:60
SYSTEM:20
4. Enter valid number of blocks to assign
OR
Press UP or DOWN key to select and press right soft key
OR
Press HOLD to delete block(s)
System returns to step 3 to make another selection
(If finished go to step 7)
5. Enter desired EXT (extension) number via keypad (e.g., 205)
OR
Press UP or DOWN key to make selection and press right soft
key to advance cursor
FREE LIST:60
EXT205:1
6. Enter valid number of blocks (0–5)
OR
Press UP or DOWN key to make selection
OR
Press HOLD key to delete block(s)
FREE LIST:60
EXT205:5
7. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC