Samsung DCS-408i - Manual (Page 34)

Samsung System Administration Guide
DCS-408 & 408i November 2001
27
Program Account Codes
[MMC 708]
These are codes which can be used to allocate calls to specific accounts. You can add
new or change existing account codes. Up to 100 entries (001–100) are allowed.
Note: To set up forced account codes, see Program Forced Account and Authorisation Codes
Program Keys
VOLUME UP & DOWN - Used to select entry number.
KEYPAD - Used to enter the account code (allowable digits 0–9).
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear data.
ACTION
DISPLAY
1. Open customer programming and select
708
2. Dial the account code entry (e.g., 005)
OR
Press
UP or DOWN to select the entry number and press
the right soft key to move the cursor
3. Enter the account code via the keypad (maximum of 12
digits, 0–9)
4. Press the right soft key to move the cursor back to step 2 to
enter another account code
OR
Press
TRSF to store and exit programming
OR
Press
SPEAKER to store and advance to next MMC
ACCOUNT CODE
001:
ACCOUNT CODE
005:_
ACCOUNT CODE
005: 123456789012