Samsung DCS-408i - Manual (Page 38)

Samsung System Administration Guide
DCS-408 & 408i November 2001
31
Add Names to the Translation Table
[MMC 728]
This CLIP feature applies to 408i systems only.
A CLIP number received from the Central Office can be associated with a name pro-
grammed in the translation table. If there is no match between a received number and
a name in this table, “no CLIP name” will be displayed.
The translation table consists of 100 entries, each comprising a 14-digit telephone
number and a 16-digit name.
The procedure for entering names is as described in Program Station Names, earlier in
this section.
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next MMC.
HOLD - Used to clear previous entry.
ACTION
DISPLAY
1. Open customer programming and select 728
2. Dial an entry number (e.g., 005)
OR
Press UP or DOWN to scroll through entries and press
the right soft key to select entry
3. Enter the phone number and press right soft key to advance
to step 4 to enter name
OR
Enter phone number and press left soft key to return to step 2
4. Enter associated name (e.g. Samsung) and press right
or left soft key to return to step 2
OR
Press
TRSF to store and exit programming
OR
Press
SPEAKER to store and advance to next MMC
CLIP XLAT (001)
DGT :
CLIP XLAT (005)
DGT : _
CLIP XLAT (005)
DGT : 3054264100
CLIP XLAT (005)
SAMSUNG