Smeg DUCO4SS - Manual (Page 25)

Instructions for the installer
27
15.4 Installing the oven
The oven is designed for installing into any piece of furniture as long as heat-resistant. Follow the
dimensions given in Figure 1-2-3. Tighten the four screws A inside the frame to secure (Fig. 1-3). For
the installation procedure shown in figure 1, ensures that the cabinet has the opening B.
Before completely building in the oven, remove the side handles which might cause unpleasant
vibrations and noise during normal operation of the oven.
If installing below a hob, a minimum worktop depth of 40 mm is recommended.
Never use the oven door to lever the oven into place when fitting.
Avoid exerting too much pressure on the oven door when open.