Sony PEG-UX40 - Manual (Page 36)

36
Sony Personal Entertainment Organizer PEG-UX50/UX40 4-676-072-11 (1)
Step 1: Verifying the settings for the wireless
LAN access point
To connect to the Internet using the wireless LAN function of your CLIÉ
handheld, you need the settings below for the wireless LAN access point.
• SSID (also called ESSID or Network Name.)
• WEP key (also called Encryption.)
You may need a user ID or password if you configure a wireless LAN access
point.
b For details, ask the System Administrator of your wireless LAN network.
Tip
WEP key is a security function that encrypts transferred data.
Note
Your CLIÉ handheld uses the channels 1-11 (2.4GHz band of frequencies).
Step 1: Verifying the settings for the wireless LAN
access point (Page 36)
To connect to the Internet using the wireless LAN function, verify the
settings for the wireless LAN access point.
Step 2: Preparing the check sheet (Page 37)
Prepare the check sheet to record the settings provided by your System
Administrator and Internet Service Provider (ISP). For more information
you need, ask your System Administrator or Internet Service Provider.
Step 3: Setting up the wireless LAN function (Page 38)
You need to set up the wireless LAN function of your CLIÉ handheld,
referring to the check sheet with the settings.
01US01COV.book Page 36 Friday, July 11, 2003 1:15 PM