Samsung 1200NF - Manual (Page 26)

English 24
Appendix
PowerSaver
This monitor has a built-in power management system called PowerSaver. This power
management system saves energy by switching your monitor into a low-power mode when it
has not been used for a certain amount of time.
This power management system operates with a VESA DPMS compliant video card installed
in your computer. You use a software utility installed on your computer to set up this feature.
See the table below for details.
Table 1. Power-saving modes
NOTE : This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
This monitor is EPA E NERGY S TAR
®
compliant and NUTEK compliant when used with a
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
State
Normal
Operation
Power-Saving Function
mode
Power-off Mode
Horizontal Sync
Vertical Sync
Video Active
Active
Active Inactive
Inactive
Blanked
Power Indicator Green Green Blinking (1 sec interval)
Power
Consumption 150 W (Max.)
145 W (Nom.)
Less than 3W
12NF(E)body.fm Page 24 Tuesday, October 17, 2000 5:25 PM