Samsung HT-TZ222 - Manual (Page 25)

25
E
N
G
●
CONNECTIONS
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
Connect AUX IN (Audio) on the Home Cinema to the Audio Out of the external Analogue 1.
component.
Be sure to match connector colours.
•
Press the 2. AUX button on the remote control to select AUX input.
You can also use the • FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
M
You can connect the Video Output jack of your VCR to the TV, and connect the Audio `
Output jacks of the VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external 1.
digital component.
Press the
2. AUX button on the remote control to select DIGITAL IN.
You can also use the • FUNCTION button on the main unit to select D-IN.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
CONNECTING AUDIO FrOM EXTErNAL COMPONENTS
FM ANT FM ANT
AUX : rear Panel OPTICAL : rear Panel
Optical Cable
(not supplied)
External Digital Component
Audio Cable (not supplied)
If the external Analogue
component has only one Audio
Out, connect either left or right.
External Analogue
Component