Conecting microphone, Dolby pro logic ii effect, P.bass – Samsung HT-TZ222 User Manual
Page 53: Connecting microphone, En g
53
E
N
G
●
SYSTEM
SETUP
DOLBY PrO LOGIC II EFFECT
This function works only in Dolby Pro Logic MUSIC mode.
Press the
1.
PL II MODE button to select MUSIC mode.
Press the
2.
PL II EFFECT button.
Press the
3.
, buttons to select the desired effect setting.
PANORAMA : You can select either 0 or 1.
•
C- WIDTH : You can select between 0 and 7.
•
DIMENS : You can select between 0 and 6.
•
P.BASS
The P.BASS function provides a bass boost to reinforce the low frequencies.
Press the
1.
P.BASS button to select P.BASS mode.
Press the
2.
P.BASS button again to turn off the P.
BASS
mode.
M
The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd
`
and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen.
The P.bass does not work with DSP/EQ or DOLBY PRO LOGIC ll modes.
`
If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and
the P. BASS function comes on.
STEP
STEP
CONNECTING MICrOPHONE
You can enjoy the feeling of a karaoke bar in the comfort of your home.
Watch the video and sing along the lyrics displayed on the TV screen
against the accompaniment.
Connect the microphone to the MIC jack on the front
1.
panel.
You can connect up to two microphones.
•
Press the
2.
MIC VOL button to adjust the voice volume of the microphone.
Press the
3.
ECHO button to adjust the echo level of the microphone.
FUNC.
MIC 2
MIC 1