Sonic Impact Technologies Sonic Impact Video-55 - Manual (Page 15)

c. If the "HOLD" key on the keypad is in the locked position, please release the "HOLD" key and press the
"POWER" key. If the "HOLD" key is in the released state, press the "POWER" key directly to turn on the
device.
d. The power indicator light will turn on, indicating that the device can be used.
e. In the standby mode (when the power indicator light is red), it is also possible to turn on the device
by pressing the standby key on the remote control.
2 Play video/audio files
1) Identify the program source equipment
Make sure that the Video-55 "30pin" interface has been correctly connected to "iPod ® 5G," or
that the "AV IN" socket has been correctly connected to another video/audio player.
If the Video-55 is not connected correctly to as iPod ® or other video/audio player, the device
will show a blue screen after it is turned on, and will automatically enter standby status after 30
seconds.
If the Video-55 is correctly connected to an iPod ® and another video/audio player at the
same time, the video/audio signal output from the iPod ® will be given priority.
ATTENTION: Be careful when connecting equipment. The interface on the
device can be damaged by improper use.
2) Play the program source signal
a. iPod ®
1 If the Video-55 is opened and turned on and the "30pin" interface is correctly connected to an "iPod
®," the device will play the video/audio signals output from the "iPod ®."
2 The Video-55 will turn on the display screen when it detects a video signal output from an "iPod ®."
3 Two minutes after the iPod ® ceases output of a video signal, the display screen of the Video-55 will
turn off automatically and will enter the audio play mode.
4 If the display screen is closed while the Video-55 is playing video/audio, the display screen will turn
off instantly, while the audio continues to play.
5 If the iPod ® connected to the Video-55 is in the off status, the "POWER" key on the operating panel
of the Video-55 or on the remote control can be used to turn on the "iPod ®."
b. Other video/audio players
1 If the Video-55 is opened and turned on and the "AV IN" interface is correctly connected to another
video/audio player, the device will play the current video/audio signal.
2 The Video-55 will turn on the display screen when it detects a video signal output from an "iPod ®."
3 Two minutes after the iPod ® stops outputting a video signal, the display screen of Video-55 will turn
off automatically and will enter the audio play mode.
4 If the display screen is closed when the Video-55 is playing video/audio, the display screen will turn
off instantly, while the audio continues to play.