SmartDisk Rover - Manual (Page 9)

Equalization
You set audio equalization (bass, treble, etc.) to your preference by selecting
EQ in the Function Menu. You’ll be presented with a choice of several
equalization settings. You may find it most convenient to select an equalization
setting while listening to music, so you can try several and pick the one
you prefer.
Music Repeat
You can choose a repeat method for music playback by selecting Repeat
in the Function Menu. You can then select one of the following methods:
Random – Plays all MP3 files at random, then stops.
Normal – Plays all MP3 files in normal* order, and then stops.
Repeat All – Plays all MP3 files in normal* order repeatedly.
Repeat One – Plays the current MP3 file repeatedly.
Preview – Plays the first 10 seconds of each MP3 file in normal* order,
and then stops.
* Note: The normal order for playback is based on the order that files have
been copied from your computer to the Rover.
On changing the Repeat method, you’ll note that small icons at the top of
the LCD will change as a reminder of the selected method during playback.
Hold
If you slide the Hold button on the side of your Rover up (towards the
headphone jack), it will prevent any other buttons from functioning. This
is useful if your Rover is tucked in a pocket or bag where it might accidentally
get turned off while you are listening to music. Slide the Hold button
back down when you need to operate the other buttons.
6