Samsung AK68-01765A - Manual (Page 10)

10_ getting started
getting started
Rear Panel
1. AUDIO OUT JACKS
Use audio cables to connect to the Audio input jacks of
your television or audio/video receiver
2. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
3. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PB and Y
video.
- If P-SCAN (480p) is set to “ON” in Video Output of
the Setup Menu, progressive scan mode will work.
- If I-SCAN (480i) is set to “ON” in Video Output of
the Setup Menu, interlaced scan mode will work.
4. DIGITAL AUDIO OUT JACKS
- Use either an coaxial digital cable to connect to a
compatible Dolby Digital receiver.
- Use a coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital, MPEG2 or DTS
decoder.
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
- See pages 47 ~ 48 to get more information on how to use the setup menu.
4
1 2 3