Splendide WD2100XC - Manual (Page 11)

Installing the washer-dryer 11
Completing the installation
•
Check the electrical requirements. Be sure
that you have the correct electrical supply
and the recommended grounding method.
•
Check that the shipping brackets have been
removed.
•
Check that the water faucets are ON.
•
Check for leaks around faucets and inlet
hoses.
•
Plug washer into a grounded 3-prong outlet.
•
Slide the washer-dryer to it’s final location
and confirm that it’s level.
•
When installing this appliance in an RV or
marine vessel, you should block in the unit
to prevent it from shifting or tipping. A
SecureFit Bracket Kit is available from
Splendide to keep the unit from shifting
front-to-back or side-to-side.
•
Test and clean the washer. Run a test load
with no laundry.
Testing and cleaning the washer,
•
Press the ON-OFF button to turn the washer
ON
•
Pour 1 to 2 TBSP of powder detergent into
the detergent dispenser compartment ‘2’
•
Select wash program ‘2’.
•
Make sure the DRY TIME knob is in the ‘OFF’
position.
•
Then press START. Allow the washer to
complete the wash cycle.