Smeg STX1-5 - Manual (Page 7)

User instructions

TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program BIO
Load Depending on the models 12 or 14 place-settings
Type of detergent B
Amount of detergent 12 place-settings: 30 g - 14 place-settings: 35 g
Rinse aid setting 5/6
1.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
CANCELLING THE CURRENT PROGRAM
• To cancel the currently selected program, open the door and hold
down the PROGRAM SELECTION (3) button for a few seconds
until the indicator lights for programs 4 and 5 illuminate
simultaneously.
• Close the door.
• After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.