Safety compliance statements – Scientific Atlanta 3250HD User Manual

Page 3

Advertising
background image

3

Object and Liquid Entry

Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short out parts that could
result in a fire or electric shock. Do not expose
this set-top to liquid or moisture. Do not place
this set-top on a wet surface. Do not spill
liquids on or near this set-top.

WARNING:

Avoid electric shock and fire hazard. Never
push objects through openings in this set-top.
These objects can cause electrical shorts
that can result in electric shock or fire. Do not
expose this set-top to rain or moisture. Do not
place objects filled with liquid (such as vases)
on this set-top.

Accessories

Do not use accessories with this set-top unless
recommended by your cable service provider.

Overloading

Do not overload electrical outlets, extension
cords, or integral convenience receptacles, as
this can result in a risk of fire or electric shock.
For equipment that requires battery power or
other sources to operate, refer to the operating
instructions for that equipment.

Lightning and Power Surges

Ground (earth) your cable system to provide
some protection against voltage surges and
built-up static charges. Plug your set-top into a
surge protector to reduce the risk of damage
from lightning strikes and power surges. If you
have questions, call your cable service provider.

Power Cord Protection

Arrange all power cords so that people cannot
walk on the cords, place objects on the cords,
or place objects against the cords, which can
damage the cords. Give particular attention to
the cords at the point at which the cord con-
nects to the plug, at electrical outlets, and at the
places where the cords exit the set-top.

Power Sources

A label on this set-top indicates the correct
power source for this set-top. Operate this set-
top only from an electrical outlet that has the
voltage and frequency that the label indicates.
If you are unsure of the type of power supply to
your residence, consult your cable service
provider or your local power company.

Power Cord Polarization

This set-top has a two-prong plug. Properly
ground (earth) this set-top by inserting the plug
into a grounded electrical, two-socket outlet. If
this plug is polarized, it has one wide prong and
one narrow prong. This plug fits only one way.

If you are unable to insert this plug fully into the
outlet, contact an electrician to replace your
obsolete outlet.

Servicing

Do not open the cover of this set-top. If you open
the cover, your warranty will be void. Refer all
servicing to qualified personnel only. Contact
your cable service provider for instructions.

Damage that Requires Service

For damage that requires service, unplug this
set-top from the electrical outlet. Refer to
qualified personnel when any of the following
occurs:
• There is damage to the power cord or plug
• Liquid enters the set-top
• There is exposure to rain or water
• Operation is not normal (the instructions in

this guide describe the proper operation)

• If you drop this equipment, or damage the

cabinet of this set-top

• If this set-top exhibits a distinct change in

performance

Upon completion of any service or repairs to
this set-top (home terminal), the service
technician will perform safety checks to deter-
mine that the equipment is in proper operating
condition.

Safety Compliance Statements

CAUTION:

To prevent electric shock, match wide blade
of plug to the wide slot, and then fully insert.

Advertising