Sony RM-TP504 - Manual (Page 16)

16 GB
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem. Should any problem persist, consult
your nearest Sony dealer.
The remote does not function.
• The MPX/DUAL and 12 buttons are not
available.
• Check that the mode of the remote corresponds
to that of the receiver (page 10).
• Point the remote at the remote sensor on the
receiver.
• Remove any obstacles in the path between the
remote and the receiver.
• Replace both batteries in the remote with new
ones, if they are weak.
• Make sure you select the correct function on the
remote.
• Press MAIN MENU before you use the V/v/B/
b/ENTER/EXECUTE button for receiver
operation (page 5).
Additional Information
Specifications
General
Remote control system
Infrared control
Power requirements 3 V DC with two R6
(size-AA) batteries
Dimensions 210 x 49 x 25 mm
Mass (approx.) 85 g excluding batteries
Design and specifications are subject to change
without notice.
Sony Corporation Printed in Malaysia