Advanced operations: remote room – Sony HS-703 User Manual

Page 15

Advertising
background image

Advanced

Operations:

Remote Room

15

Watching Television from a remote room set-top box (Zone 2 Only)

IMPORTANT NOTE:

In this mode you will be listening to TV sound through the television’s speakers only, not through

the system speakers.

• Use your local TV controls, not the keypad.

Watching DVDs (Zone 2 Only)

1. Volume Control.

Turn clockwise to raise the volume. Turn counterclockwise to lower the volume.

2. DVD Source Select button.

Automatically turns on the DVD changer, A/V receiver and the zone amplifier. Sets

the correct A/V receiver input. Activates “Play” on the DVD changer. Changes the keypad mode to operate

DVD functions.

3. Power button.

Press to turn the Room system power off. Press and hold to turn the Zone system power off.

4.

Status LED.

Indicates system status. Lights up GREEN when the room speakers are on, RED when the system

is on but the local speakers are muted. When the LED is off, the system is off.

5. Play button.

Activates DVD Play.

6. Stop button.

Stops DVD playback.

7. Pause button.

Temporarily halts DVD playback. Press again to resume playback.

8. Rewind button.

Activates DVD reverse scan. Press again for high-speed scan.

9. Fast Forward button.

Activates DVD forward scan. Press again for high-speed scan.

10. + button.

Goes to the next DVD chapter. Press repeatedly to skip forward multiple chapters.

11. - button.

Press - to go to the beginning of the current DVD chapter or to the previous chapter if you’re already at

the beginning. Press repeatedly to skip back multiple chapters.

12. Mute button.

Press once to block the audio portion of the program temporarily, as during a telephone

conversation. Press again to resume hearing the audio portion of the program.

13. Disc + button.

Advances the 5-disc DVD changer to the next disc.

14. System Off button.

Shuts down the entire system, except for the Main Room television.

Watching VHS Tapes (Zone 2 Only)

1. Volume Control.

Turn clockwise to raise the volume. Turn counterclockwise to lower the volume.

2. VCR Source Select button.

Automatically turns on the VCR and A/V receiver and sets the A/V receiver to the

correct input. Changes the wall panel mode to operate the VCR functions.

3. Power button.

Press to turn the Room system power off. Press and hold to turn the Zone system power off.

4. Status LED.

Indicates system status. Lights up GREEN when the room speakers are on, RED when the system is

on but the local speakers are muted. When the LED is off, the system is off.

5. Play button.

Activates VCR Play.

6. Stop button.

Stops VCR playback.

7. Pause button.

Temporarily halts playback on the selected component. Press again to resume playback.

8. Rewind button. From the Stop mode, activates rewind. From the Play mode, activates reverse scan.

9. Fast Forward button.

From the Stop mode, activates fast forward. From the Play mode, activates forward scan.

Advertising