Salton, Inc HB-1101 - Manual (Page 5)

NOTE: If food gets lodged around the Blade or the Blade Guard, unplug the
unit from the wall outlet and use a spatula to dislodge the food. The Blade is
very sharp. DO NOT use your fingers.
IMPORTANT: NEVER immerse the hand blender past the length of the
Blending Attachment. DO NOT immerse beyond the seam of the
Blending Attachment. NEVER immerse the Motor Body into any liquid
or mixture.
HELPFUL HINTS
• To use the Blending Attachment in a saucepan, be sure to remove the
pan from the stove as the Blending Attachment is not designed for use
over a heat source.
• When blending in non-stick cookware, be careful not to scratch the
coating with the blade.
• When blending or pureeing, cut food into uniform sizes for best results.
• This appliance is not designed to chop ice. Add ice to beverages after
blending.
• To achieve best results, use deep, tall pots or containers
• For easy cleanup, rinse Blending Attachment immediately after use.
CARE AND CLEANING
1. Make sure the unit is unplugged from the wall unit before removing
attachments from the Motor Body.
2. Wipe the Motor Body with a damp cloth. If necessary, you can use a
little mild detergent. DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
3. Wash the Blending Attachment in warm soapy water.
NOTE: Be careful when handling the Stainless Steel Blade on Blending
Attachment, the blades are sharp.
4. Rinse and dry thoroughly.
5
Booklet_HB-1101_ENG:Salton Booklet 5/25/09 3:43 PM Page 5