Changing the “picture” setting, Xchanging the “picture” setting – Sony wega KV-XR34 User Manual
Page 15
15
Sony KV-XR34M83 Group C7 (
GB
)_4-100-628-11 (1)
Menu Adjustment
x
Changing the “Picture” setting
The “Picture” menu allows you to adjust the picture settings.
1
Press MENU.
2
Make sure the “Picture” icon (
) is
selected, then press
.
3
Press V or v to select the desired item (e.g., “Mode”), then press
.
Select
To
“Mode”
choose either “Dynamic”, “Standard”, “Soft” or “Personal”* (see
page 11).
“Color Temperature”
adjust white color tint.
Choose either “Cool” (blue tint), “Neutral” (neutral tint) or
“Warm” (red tint).
“VM”
sharpen the edges of each object.
(Velocity Modulation)
Choose either “High”, “Low” or “Off”.
“Intelligent Picture”
optimize picture quality.
Press
V or v to select “On”, then press
.
To cancel, select “Off”, then press
.
* You can adjust the setting to your personal preference in the “Picture Adjustment” ,
“Color Temperature” and “VM” options only when the “Personal” mode is selected.
Adjusting the “Picture Adjustment” items under
“Personal” mode
1
Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
“Hue” (color tones) or “Sharpness”, then press
.
Selecting “Reset” will set your TV to the factory setting.
2
Press V,v,B or b to adjust the setting of your selected item, then press
.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “Personal”.
Notes
• “Hue” can be adjusted for the NTSC color system only.
• Reducing “Sharpness” can also reduce picture noise.
Confirm
End
Picture
Color Temperature:
Cool
VM:
High
Picture Adjustment
Mode:
Dynamic
Intelligent Picture:
On
Select
01GB05AVD-MIX.p65
12/12/2003, 5:08 PM
15
Black