Samsung SMO-XAAV - Manual (Page 33)

Eng-33 Eng-33
3-5) TITLE MENU Function setting
• Function: Set the title of each camera at your discretion.
• Setting method: Move to #5. TITLE MENU by using ▲/▼ KEY at SETUP MENU, and press the
ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial
setting status.)
Move to a target camera channel by using ▲/▼ KEY then press the ENTER KEY to display a cursor at
the space of the first character of camera title. Move the cursor to a target character in OSD box of
lower part by using ▲/▼ KEY, then press the ENTER KEY to set the character. The cursor
automatically moves to the next space for a new character after one character is set. Set the title of
camera by repeating the same method.
(Only eight characters are available for a camera title.)
TITLE SETTING
06/01/03 13:14:00
CAMERA1 CAM1
CAMERA2 CAM2
CAMERA3 CAM3
CAMERA4 CAM4
CAMERA5 CAM5
CAMERA6 CAM6
CAMERA7 CAM7
CAMERA8 CAM8
0 1 2 3 4 5 6 7 8 9 : = . ( )
A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z [ / ] _ ~ ← + −