Sonic Blue Scooter - Manual (Page 30)

30 www.pridemobility.com Sonic/RevA/May 2004
DISASSEMBLY
No tools are required to disassemble or assemble your scooter. Always disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work. Keep in mind that the disassembled sections of a scooter
take up more floor space than when assembled.
I X . D I S A S S E M B LY A N D A S S E M B LY
You can disassemble your scooter into four pieces: the
seat, the front section, the rear section, and the battery
pack. See figure 15.
Before disassembling the scooter, remove the key and place
the manual freewheel lever in the drive (forward) position.
1. Lock the tiller in place by pushing the tiller lock knob in and turning it clockwise 90°. See figure 16. The front
wheel must face forward in order to lock the tiller.
2. Remove seat by pulling it straight upward.
3. Remove the battery compartment lid and place it out of the way.
4. Unplug the front-to-rear harness and both battery harnesses. See figure 17.
LOCKED
POSITION
Figure 16. Tiller Lock knob (Locked) Figure 17. Wiring Harnesses
BATTERY
HARNESSES FRONT-TO-REAR
HARNESS
Figure 16A. Tiller Lock Knob
(Unlocked)
UNLOCKED
POSITION
Figure 15. Disassembled Scooter
BATTERY PACK
REAR SECTION
SEAT
FRONT SECTION
WARNING! Lifting weight beyond your physical capability may result in personal injury.
Ask for assistance when necessary before disassembling or assembling your scooter.