Samsung CSN2077DV - Manual (Page 71)

C HAPTER F OUR : DVD O PERATION
5.22
D V D O
P E R AT I O N
Setting up the Audio Options
• Digital output
PCM: Converts to PCM(2CH) 48kHz/16Bit audio. Select PCM when using the Analog Audio Outputs.
Bitstream: Converts to Dolby Digital BITSTREAM - 5.1CH (if MPEG-2, 7.1CH). Select BITSTREAM
when using the Digital Audio Output.
• DTS
On : Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a DTS
DECODER.
Off : Doesn’t output digital signal.
• Dynamic Compression
On : To select dynamic compression.
Off : To select the standard range.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
3
Press the UP/DOWN ▲▼
buttons to select “Audio
Options”, then press the
ENTER button.
1
Press the MENU button.
4
Press the UP/DOWN ▲▼
buttons to select the
desired item, then press
the LEFT/RIGHT œ√ but-
tons.
Press the RETURN button
to exit.
2
Press the UP/DOWN ▲▼
buttons to select “DVDP
Setup”.
Press the LEFT/RIGHT œ√
buttons.
The SETUP MENU is dis-
played.
02360B-01(E)-CHAPTER 5 2/26/03 11:54 AM Page 22