Sharp LL-T1811W - Manual (Page 10)

10
Product description
Front view
1 5 4 3 2 6
Control Panel
1. INPUT button To switch between the signal’s input terminals. (Analogue signal input
terminal
↔ DVI-I input terminal)
2. MENU button This button is used to pop-up, select and close the OSD Menu.
3. SELECT button This button is used to select menu options when the OSD Menu is
displayed.
4. buttons When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the value of a selected
option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness .
5. Power LED This LED is lit green when in use and orange when in power-saving
mode.
6. Power button Pressing this button turns the power on. (After turning the power on, it
may take a little time before the screen displays.)
Press the button again to turn the power off.
Adjusting the angle of the monitor
Lightly holding both sides of the monitor, adjust
it to a suitable viewing angle.
CAUTION!
- Pressure from hands on the LCD panel could
cause damage.