Sanitation system components – SeaLand 3000 User Manual

Page 6

Advertising
background image

6

SANITATIoN SYSTem CompoNeNTS

Vacuum Toilet: VacuFlush all-ceramic vacuum toilets with

Flush and Forget

®

technology operate differently compared

to other toilets. The vacuum system uses a small amount of

water (a little more than a pint or .5 liter) per flush in addition

to a simple vacuum. The toilet is connected to a pressurized

freshwater system. Fresh water is the key to an

odor-free

bathroom compartment. Most VacuFlush toilets are

equipped with an integral vacuum breaker which prevents

the possible contamination of the freshwater supply.
Flush/Add Water Switches (3100, 3400 models only):

Wall-mounted push-button switches provide electronic

operation of flushing and adding water to the toilet bowl.

Models include two-light vacuum status panel indicating the

toilet is “OK to Flush” or “Do Not Flush”. Models vary.
Vacuum Generator: The vacuum generator combines

the vacuum tank and vacuum pump in one unit. It greatly

reduces installation time and eliminates the hose run

between the tank and pump. Their compact size makes them

especially well-suited to smaller installation spaces.
Vacuum Tank: The vacuum tank stores vacuum energy.

System vacuum level is monitored by a vacuum switch

located on the vacuum tank. When this switch senses

a drop in vacuum in the system, it automatically signals

the pump to energize and bring the vacuum to operating

level. This process is normally completed in less than one

minute.
Vacuum Pump: The vacuum pump is an electric,

straight-through bellows type. It is manufactured of long-

lasting polypropylene and draws only 4 to 6 amps of current

at 12 VDC. This unique pump design is both an efficient air

and liquid pump that handles solids without a problem. It

has two duckbill valves on each side of the pump chamber

to maintain vacuum and prevent backflow of waste.
“Tank Full” Shut-Down Switches (RV option only):

These “Tank Full” micro-float switches shut down the

vacuum generator when the waste holding tank is full.

We offer three styles to accommodate various installation

requirements.
Sealing grommet style – Item number 900101
MPT style – Item number 900100
Vent style – Item number 900102
(NOTE: Requires relay mounted on vacuum generator.)

vacuum Toilets

vacuum Tank and

vacuum pump

Rv “Tank Full” Shut-Down Switches

Sealing

grommet

style

mpT

style

vent style

marine Flush/Add Water Switches

Vimar

Gewiss

vacuum

Generators

Rv Flush/Add Water

Switch

Advertising
This manual is related to the following products: