Samsung AV-R720 - Manual (Page 12)

23
GB
22
OPERA
TION
Setting the speaker listening distance
√
• If the listening position is beyond the range of the speaker distance setup,
set the speaker distance to the maximum.
• The distance range of the overall speaker system is determined based on
the F.L(front left) speaker distance from the listening position.
• Based on the max delay channel, the distance of the front speaker is
1.5m(5ms) and the surround speaker can be set up to 4.5m(15ms).
Press SETUP/MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “DIST SETUP”, and then
press ENTER button.
Press button to select the speaker you want.
• Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝
S.L ➝ S.W will be selected in turn.
Press …† button to set the speaker distance.
• For F.L, CEN, F.R, S.W, S.R, SBR, SBL, S.L Speaker, you can set the distance
from the speaker to listening position between 0.3~9.0m in intervals of
0.3m.
1
2
3
4
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Setting Speaker Distance
Set the distance from the speaker to listening position in intervals of 0.3m.
• F.L (front left) : 0.3m ~ 9m • CEN (centre) : 0.3m ~ 9m
• F.R (front right) : 0.3m ~ 9m • S.R (surround right) : 0.3m ~ 9m
• SBR (surround back right) : 0.3m ~ 9m • SBL (surround back left) : 0.3m ~ 9m
• S.L (surround left) : 0.3m ~ 9m • SW (subwoofer) : 0.3m ~ 9m
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the centre and surround speakers.
Setting digital input
You can set the digital input for a DVD/SAT/CD player to either OPTICAL or COAXIAL to match the
connections you've made .
√
Press SETUP/MENU button, and then press ENTER
button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “DIGITAL IN”, and then
press ENTER button.
Press button to select the the CD, DVD or SAT
function.
• Each time you press this button, CD ➝ DVD ➝ SAT will be selected in turn.
Press …† button to set the digital input.
• Each time you press this button, COAXIAL ➝ OPTICAL2 ➝ OPTICAL1
will be selected in turn.
1
2
3
4
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
• You can select only one digital input for each function.
Example) If you have selected COAXIAL for the CD function,
you cannot select COAXIAL for the DVD or SAT function.
Function
DVD
SAT
CD
Digital input
OPTICAL1
OPTICAL2
COAXIAL