SRS Labs WT01-15A1 - Manual (Page 22)

21
Connecting to an Antenna or Cable TV
1 Connect one end of the UHF or CATV cable to ANT Jack (VHF/UHF
IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV cable.
Note
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Auto Program” on page 49.
R L
ANT jack
Antenna/CATV
Antenna/CATV
socket
Antenna
coaxial cable
(VHF/UHF IN jack)
9
Getting Started