SIIG 04-0501A - Manual (Page 5)

5
Hardware Installation
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer.
2. Unplug the power cord and remove your computer
cover.
3. Remove the slot bracket from an available PCI slot.
4. Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5. Replace the slot bracket holding screw to secure
the card.
6. Connect one end of the audio cable from your
CD-ROM or DVD-player to the CD-In or Aux-In on
the soundcard.
7. Replace the computer cover and reconnect the
power cord.
Driver Installation
Windows 2000/XP/Server 2003
1. After installing the board boot up Windows.
2. At the new Add New Hardware Wizard, click
Cancel.