Seagate ST410800W/WD - Manual (Page 20)

18 Elite 9 Installation Guide, Rev. B
continued from previous page
12 All power-saving features are enabled.
13 Seeking is defined as a third-stroke seek at OD. A com-
mand is issued every 23 msec.
14 Read track is defined as repeat reads of track 15 with an
88% duty cycle.
15 Operating condition is a third-stroke seek at OD and read 1
track. A command is issued every 60 msec for ST410800W
drives and every 72 msec for ST410800WD drives.
16 Read track is defined as repeat reads of track 15 with a 45%
duty cycle at 00.
Initial setup information
The following topics are presented to guide you through
the installation process. These topics are presented in
the order you should follow to properly install the drive.
• Setting the SCSI ID jumpers
• Terminating the drive
• Changing other applicable jumper options
• Synchronizing spindles
• Providing adequate cooling
• Mounting the drive and connecting cables
• Formatting the drive
Each option-jumper illustration identifies the original
equipment manufacturer (OEM) default factory setting.
These are the most commonly used settings but are not
necessarily the ones set for your particular system.