Editing with another vcr, 48 editing with another vcr – Sony SLV-ED85PS/TH User Manual
Page 48
Additional Operations
48
Editing with another VCR
How to connect to record on this VCR
How to connect to a stereo system (SLV-ED85PS/TH
only)
Connect LINE-1 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Tips
• (SLV-ED55PS)
Use the following audio/video cable according to the type of the other VCR.
• (SLV-ED85PS/TH)
If the other VCR is a monaural type, the sound is recorded only on the channel
whose jack is connected to the audio plug. To record on both right and left channels,
connect the audio plugs to the AUDIO R/L jacks using a VMC-910HG audio/video
cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If you connected this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
This VCR (Recorder)
VMC-810HG audio/video cable (not supplied)
LINE-1 IN
Other VCR (Player)
LINE OUT
TV
: Signal flow
Jack
LINE-1 IN
LINE-2 IN
If the other VCR is:
Use a cable such as:
Stereo type
VMC-910HG (3-phono to 2-phono)
Monaural type
VMC-710HG/720HG (2-phono to 2-phono)
Stereo type
VMC-810HG (3-phono to 3-phono)
Monaural type
VMC-910HG (3-phono to 2-phono)