Sharp TINSE4633FCZZ - Manual (Page 10)

8
PART NAMES AND FUNCTIONS
(1) Output tray (center tray)
Jobs are delivered to this tray.
(When a finisher is installed, the
output tray (center tray) cannot be
used.)
(2) Operation panel
(3) Finisher*
This can be used to staple output.
(4) Main power switch
This is used to power on the machine.
(5) Tray 1
Up to 500 sheets of paper (21 lbs.
(80
g/m 2 )) can be loaded in each tray.
(6) Tray 2/Tray 3/Tray 4 (500-sheet
paper feed unit is installed)*
This holds paper. Up to 500 sheets
(21 lbs. (80
g/m 2 )) of paper can be
loaded.
(7) USB connector (type A)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB
memory or other USB device to the
machine.
*Peripheral device. For more information, see "PERIPHERAL DEVICES" in
"Chapter 1 - BEFORE USING THE MACHINE" in the Operation Guide.
(5)
(1) (3) (2)
(4) (6) (7)
mxc400p_us_qck.book 8 ページ ２００９年１０月５日 月曜日 午後３時４２分