Samsung DVD Playe - Manual (Page 9)

Choosing a Connection Choosing a Connection
The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
Connection to a TV (For Video)
Connection to an Audio System
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Method 1 Method 2
Analog Audio Out
Dolby Digital Decoder
Digital Audio Input Jack
2ch Amplifier
Audio Input Jacks
Digital Audio Out
AUDIO
CD/DVD
PLAYER
CD/DVD
PLAYER
TV (Normal, Widescreen, Projection, etc..)
Good picture Basic Audio Better picture
Method 1 Method 2
Audio Output Jacks
OR
OR
AV Cable S-Video
Cable
Video Output Jack S-Video Jack
TV
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
16 17
CONNECTIONS
Note • Please directly connect this unit’s video outputs to the TV.
If you connect this unit to the TV via a VCR or play back via a
VCR, the copy card may cause disturbance in the picture.