SMC Networks EliteView 6.20 - Manual (Page 218)

E
RROR
M
ESSAGES
I-26
Cause: The MIB may not contain the SMC MIB.
Action: Use the MIB compiler to add the SMC MIB.
Initialize namebase failed.
Cause: The name database dynamic library failed to initialize.
Action: The Namebase.dbf file may be corrupted, use the namebase manager to check it.
Invalid Retry value.
Cause: The retry value should be between 0 and 2000.
Action: Change it.
Invalid target address.
Cause: The target IP address or name is not correct.
Action: Use the name in the name database or correct the IP address.
Invalid Timeout value.
Cause: The timeout value should be between 0 and 2000.
Action: Change it.
Open SNMP communication channel failed!
Cause: The network subsystem may have failed.
Action: Use the alive test program to make sure the network subsystem is OK.
Open TFTP communication channel failed!
Cause: The network subsystem may have failed.
Action: Use the alive test program to make sure the network subsystem is OK.
Out of memory.
Cause: Memory is not enough.
Action: Add system memory or close some applications and retry.
Run AccInfo failed!
Cause: tftpsvr.exe may have abnormally terminated the last time it was run.
Action: Restart Windows and retry.
TFTP.DLL
Bind to UDP socket failed with error code = %d.