Ruger Caulking Gun - Manual (Page 27)

27
WARNING –PARTS PURCHASERS
It is the purchaser’s responsibility to be
absolutely certain that any parts ordered from
the factory are correctly fitted and installed.
Firearms are complicated mechanisms and
IMPROPER FITTING OF PARTS MAY RESULT
IN A DANGEROUS MALFUNCTION, DAMAGE
TO THE FIREARM, AND SERIOUS INJURY TO
THE SHOOTER AND OTHER PERSONS.
The
purchaser and installer of parts must accept full
responsibility for the correct adjustment and
functioning of the rifle after such installation.
PARTS MUST FIT CORRECTLY
ORDERING PARTS
Please contact the New Hampshire Product Service Department for parts
availability and current prices. All parts orders for the RUGER
® NO. 1 should
be sent to: Sturm, Ruger & Co., Inc., Product Service Department, 411 Sunapee
Street, Newport, New Hampshire, 03773, (603) 865-2442.
We cannot comply with open account or C.O.D. requests. Payment in the form of
a check, money order, Visa or Mastercard must accompany your order. Credit
Card orders must include the account number, expiration date and whether it is
a Visa or Mastercard account. Minimum parts order is $1.00 plus a $3.50
shipping and handling charge. Order parts by Part Number and Part Name and
include the entire serial number of the firearm for which the parts are being
ordered. There is a minimum net labor charge of $20.00 plus $12.00 shipping
and handling if the parts are factory fitted. All factory-fitted parts are fitted on an
exchange basis only. We will not return the replaced parts.
Because the receiver of the Ruger No. 1 rifle is a serial numbered component, it
is defined as a “firearm” by Federal law and is not sold as a separate component.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning — Parts Purchasers,” above.
CAUTION: Firearm users are cautioned that a gun containing
modified, broken, malfunctioning, or badly worn parts should not
be fired.