Sony HTSS1000P. - Manual (Page 53)

53 GB
E:\SEM_Janet\Year2006\Revision_Data\Revision1_SS1000P\JC060000_2681272121SS1000P_
GB\2681272121\GB05OTH_HT-SS1000P-CEL.fm masterpage: Right
Ad
dition
al I
n
fo
rm
atio
n
model name1[HT-SS1000P]
2-681-272-12 (1)
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy
the problem (page 19). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
Specifications
Amplifier section
Power Output
1)
Stereo mode (rated) 70 W + 70 W
(4 ohms at 1 kHz, 0.7%)
Music power output (reference)
FRONT
2)
: 143 W/ch
(With SS-MSP1000)
CENTER
2)
: 143 W
(With SS-CNP1000)
SUR
2)
: 143 W/ch
(With SS-SRP1000)
SUBWOOFER
2)
: 285 W
(With SS-WP1000)
1)
Measured under the following conditions:
2)
Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
To clear See
All memorized settings page 19
Customized sound fields page 41
Area code Power requirements
CEL, CEK 230 V AC, 50 Hz
SA-CD/CD,
VIDEO 1, 2
Sensitivity: 1 V
Impedance: 50 kohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
VIDEO 2, SA-CD/
CD (Optical) Sensitivity: –
Impedance: –
Gain levels ±6 dB, 1 dB step
continued
GB01COV_HT-SS1000P-CEL.book Page 53 Wednesday, March 22, 2006 8:44 AM