Samsung HMX-U20SN - Manual (Page 54)

44
Example of Time Lapse Recording
The Time Lapse Recording function
records image frames at a predefined
interval over the total recording time to
produce a time-lapse video.
Time Lapse Recording is useful for
filming in the following situations:
Blooming flowers
A bird building a nest
Clouds rolling by in the sky •
•
•
Total time for recording
Recording interval
Timeline
Time for recording on the
storage media (a video clip of
Time Lapse REC)
This function is shut off after being used one time.
30 captured images compose a video of 1 second length. Since the minimum length of a video
your camcorder can save is one second, the interval defines how long the Time Lapse Recording
should be. For example, if you set the interval to "30 Sec," total recording tme should be set to at
least 15 minutes to record a minimum video length of 1 second (30 images).
Once the Time Lapse REC finishes recording for its total recording time, the camcorder switches to
standby mode.
Press the Recording start/stop (
) button if you want to stop the Time Lapse REC.
Audio is not recorded during Time Lapse Recording.
If a video recording fills up 3.8GB of storage media, a new recording file is automatically started at
that point.
If the battery charge is exhausted during Time Lapse REC, the camcorder saves the recording up
to that point, and then switches to standby mode. After a while, it displays a warning message,
then turns off automatically.
If memory runs out during a Time Lapse REC, the camcorder switches to standby mode after
saving what was recorded so far.
We recommend using the AC power adaptor when using the Time Lapse REC function.
•
•
•
•
•
•
•
•
•
advanced recording


+"/

".
.VMUJ
7JFX Zoom